PRM Rental Systems and Equipment

 

PRM can provide you with the lease equipment you need for short or long term projects. Customized leases and terms allow you to meet specific project budgets or timelines. In addition, our smaller rental equipment is available for daily, weekly or monthly Pilot Testing. End of Lease purchase options are also available if you wish to retain the equipment. If you do not see a unit below that meets your specifications, please contact us as our rental fleet is constantly growing and being updated.

 

Units listed below may be in the field on long term lease and not readily available. Please contact Luke Kemp for more information about current system or equipment availability. 888-873-2848

Rental Remediation Systems: SVE, Dual Phase, Air Sparge and more

Trailers:

RT-5383 – Mobile Air Sparge/

Soil Vapor Extraction System

RT-5235 – Mobile Air Sparge/

Soil Vapor Extraction System

RT-850 Mobile tratment trailer andem 20HP liquid ring pumps 600CFM Electric Cataltic Oxidizer

RT-850 – Mobile Treatment Trailer
With 600 CFM Electric Catalytic Oxidizer

RT-4377 – Mobile Multi Phase Extraction System

RT-4465 – Mobile Air Sparge/

Soil Vapor Extraction System

RT-4269 – Sparge and Vent System

  • 7' x 12' Single Axle Trailer

  • Sealed partition creates two rooms, one room contains the controls and sparge equipment (non-classified) and the smaller room houses the SVE equipment and is wired for Class 1 Div. II hazardous locations.

RT-5247 – Mobile Air Sparge/

Soil Vapor Extraction System

RT-5197 – Mobile Air Sparge/

Soil Vapor Extraction System

  • 520 SCFM @ 49"WC

RT-5080 – Mobile Air Sparge/

Soil Vapor Extraction System

RT-5191 – Mobile Air Sparge/

Soil Vapor Extraction System

  • 875 SCFM @ 61"WC

RT-3981 – Ozone System with Advanced
Oxidation Process Manifold

  • 7' x 16' Enclosed Trailer

  • 240V Single Phase

Connex and Building Contained Systems

RT-3244 – Dual Phase Extraction System with Air Sparge

RT-4259 – Air Sparge/
Soil Vapor Extraction System

  • 750 SCFM @ 10"Hg

RT-5067 – Air Sparge/

Soil Vapor Extraction System

  • 240 SCFM @ 100"WC

RT-2832 – Ammonia Gas System

  • 230V 3 Phase XP

  • Ammonia Scrubbing Tower

RT-4824 – Groundwater Treatment System

  • AP2 Pneumatic Pumps

  • PRM OWS20 Oil Water Separator

  • LP55 Liquid Phase Carbon Vessels

RT-5077 – Air and Water Treatment System

  • 8' x 40' Connex Container

  • 4 Stage Air Stripper

  • LP55 Liquid Phase Carbon Vessels

RT-3426A – SVE Blower Unit

  • 48" x 96" x 84" Security Enclosure

  • 350 SCFM @ 12" Hg

  • ZZ7M PD Blower with
    30 HP TEFC Motor

RT-5059 - Prepackaged Air Sparge/
Soil Vapor Extraction System

  • 8’ x 12’ insulated building

  • NEMA 4 Control Panel; UL 508A and 698A Certifications

  • 6 hp Regenerative Blower, 230V, 3 ph, XP motor (Flow ~180 cfm @ 55”WC vacuum)

Rental Skids

RT-4348 – Propane Soil Vapor
Extraction System

  • 4' x 3' Aluminum Skid

  • 20HP Kohler Propane Motor

  • 170 ACFM @ 10"Hg

RT-1437 - Skid Mounted Soil Vapor

Extraction System

  • 125 SCFM @ 115"WC

  • PRM MS60 Moisture Separator

  • 4 X 2" Camlock Adapters to connect 2" Tanker Hose to Inlet

2bfhskid.jpg

Dual Bag Filter Housing Skid

  • 304 Stainless Steel #2 Size Filter Housings in Parallel

  • Flanged Inlet/ Outlet Connections

  • Max Pressure 150 PSI

RT-3339 - Skid Mounted Soil Vapor

Extraction System

  • 35 SCFM @ 65"WC

  • 2HP Regen Blower, 230V 3 Phase

  • UL Listed 508A and 698A

RT-048 - Dual Phase Extraction Skid

  • 50 SCFM @ 15"Hg

  • 230V, 3 Phase 7.5 HP LRP

  • 40 Gallon Moisture Separator

RT-1206 - Skid Mounted Soil Vapor

Extraction System

  • 150 SCFM @ 20"WC

  • 8HP Regen Blower, 480V

Sparge Cart with Oil-Free Reciprocating Compressor for Pilot Testing and Remediation Applications

RT- 722 - Sparge Cart

  • 10 SCFM @ 10 PSI

  • Mounted on heavy duty hand cart for easy maneuverability

  • Small and lightweight, this unit can be moved around on site by one person.

  • Can be powered with a small 5000w generator

SKID MOUNTED REGENERATIVE BLOWER WITH VFD

RT-2352 - Skid Mounted Regenerative Blower with Variable Frequency Drive

  • 208/230V 3 Phase Motor

  • ABB VFD for Blower Speed Control

  • Plastic skid reduces weight allows unit to be pushed into position by 2 people.

  • Small enough to be transported in full size pickup truck

RT-5023 – Skid Mounted

Biogas/ Landfill Flare

  • 300CFM Candlestick Utility Flare, 304 Stainless Steel Wind Shroud

  • PRM MS80 Moisture Separator

  • Pulsed or Continuous High Energy Igniter eliminates need for gas assist pilots              

RT-5537 – Skid Mounted
Biogas/ Landfill Flare

  • 500CFM Candlestick Utility Flare rated for 10:1 turndown, mounted on skid with hinge for raising flare onsite or lowering for transport

  • PRM MS80 Moisture Separator

  • High Energy Gas Assist Ignition Package with thermocouple for temperature control and monitoring

  • UL Listed System Control Panel          

RT-6039 – Skid Mounted
Biogas/ Landfill Flare

  • 500CFM Candlestick Utility Flare rated for 10:1 turndown, mounted on skid with hinge for raising flare onsite or lowering for transport

  • PRM MS80 Moisture Separator

  • High Energy Gas Assist Ignition Package with thermocouple for temperature control and monitoring

  • UL Listed System Control Panel          

RT-5343 – PRM 82.5-4 Air Stripper

  • Up to 200 GPM, 900 CFM

  • 8’ x 8’ Skid

RT-6037 – PRM 243 Air Stripper

  • 5 GPM to 60 GPM, up to 1000 CFM

  • 5’ x 4’ Skid

OXIDIZERS

RT-0007 – 2000 CFM Gas Oxidizer

Features: 

  • Stainless Steel Combustion Chamber with 8" Refractory

  • 460V, 3 phase system

  • 2 HP, 460 V, 3 phase TEXP Combustion Air Blower

RT-0618 – 1000 CFM Thermal Catalytic Oxidizer

Features: 

  • 6' Steel Stack

  • Hauk PBG Burner and Burner Blower

  • Chicago 1500 Process Blower

  • Enardo Series 7 Flame Arrestor

RT-2690 – Mobile 750 CFM Thermal Catalytic Oxidizer

Features: 

  • Rated for 98% destruction

  • 20 HP Lamson Turbotron Process Blower

  • Integrated Industrial Bluetooth Interconnect

  • Automated Dilution Air Control System

  • Automated Purge Control System

RT-2691 – 750 CFM Thermal Catalytic Oxidizer

Features: 

  • Rated for 98% destruction

  • 20 HP Lamson Turbotron Process Blower

  • Integrated Industrial Bluetooth Interconnect

  • Automated Dilution Air Control System

  • Automated Purge Control System

RT-2872 – 300 CFM Electric Catalytic Oxidizer

Features: 

  • 98% destruction efficiency

  • High Efficiency Stainless Steel Heat Exchanger

  • 3 HP Marathon Blower Motor

  • NEMA 4 Controls enclosure with deadfront

RT-3574 – Mobile 750 CFM Thermal Catalytic Oxidizer

Features: 

  • 5 HP Blower, 240V

  • AB Micrologix PLC and Controller

RT-3798 – 500 CFM Gas Oxidizer

Features: 

  • Caloritech 480v 3ph Heating Element

  • Enardo Series 7 Flame Arrestor

  • NEMA 4 enclosed Control Panel

  • Twin City Process Blower

  • Gast R5325A Dilution Blower

RT-4781 – 600 CFM Oxidizer

Features: 

  • Capacity: 300-700 scfm

  • Maximum Input Loading: 430 lb/day petroleum hydrocarbons @700 scfm

  • Catalyst Destruction Efficiency up to 99.5%

  • Heat Exchanger: 304 Stainless Steel spiral plate 73% thermal efficiency at 600 cfm

Carbon Vessels

RT-2520A/B – PRM VP 1000 Vapor Phase Carbon Vessels

  • 48" Diameter x 72" Tall

  • 200-1000 SCFM Flow, 8 Inch Inlet/Outlet

RT-3510 – PRM HP 2000 Liquid Phase Carbon Vessel

PRM Filtration is a tradename of
Product Recovery Management, Inc. (PRM)

200 20th Street

Butner, North Carolina 27509

 

Main Phone: 919-957-8890

Toll Free: 1-888-873-2848

Fax: 919-957-7230

© 1999-2020 by Product Recovery Management, Inc. All Rights Reserved.